
..A..
WARNING : Only
perform
such
T procedures as detailed in
this
manual.
It
is recommended
that
dealer
assistance be periodically obtained on
other
components/systems
not
cov-
ered in
this
manual. Unless
otherwise
specified, engine should
be
turned
OFF
for
all lubrication and maintenance
procedures .
..A..
WARNING : Do not lubricate throt-
T tie and I or brake cables and hous-
ings.
When lubricating grease fitting, always
use low temperature grease (PIN 413
7061
00).
Steering
mechanism
Using light machine oil, lubricate the
longitudinal pivot of the
ski
and ski cou-
pler bolt.
A017 006 007
Allow the oil to run
in
and move ski
several times to distribute lubricant.
From
inside of
cab,
lubricate front shock
system
as
follows :
Remove the screw shown.
Grease fitting
Lubricate until the grease appears from
the hole, then, firmly plug the hole with
a finger and slowly continue to lubricate
until grease appears at the joint.
Grease must
appear from
this joint
Oil
tie
rod
ball joints and steering column
upper and lower bushings.
27
Komentáře k této Příručce